SAFETINEX light curtains

/in , , , , , , , , , ,

To speed up delivery to our North American customers, Contrinex is now manufacturing our highly popular SAFETINEX line of light curtains in the USA! Each Safetinex product is hand-assembled, tested for quality and accuracy, pressurized and verified right in our newly expanded Texas location. Call (866) 289 2899 to order your kit today.

WATCH VIDEO NOW… 

The newly developed YBB Type 2 series comprises a complete range of 30 mm resolution hand protection devices for all your Type 2, PL c, SIL 1 applications.
The rugged aluminum housing and PMMA screen are suitable for applications in almost any kind of industrial environments. Quick and simple installation is achieved by 5-pin M12 connector, integrated alignment aids, and the mounting brackets also included.

  • Robust housing
  • Simple wiring and installation
  • Protective heights from 150 mm to 1827 mm
  • Operating distance up to 12 m

566x281px_safety_hand_protection_appTECHNICAL DATA

  • Supply voltage: 24 VDC +/-20%
  • Protection class: IP 65 + IP 67
  • Operating temperature: 0…50°C
  • Safety rating: Type 2, category 2, PL c, SIL 1
  • Resolution: 30 mm
  • Output: 2 x PNP
  • Certification: TÜV SÜD, CE

Labeling machines
For the operators of fully automated product labeling machines, the hazard involved is mostly slight.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, a protected machine opening can be used to interrupt the conveyor or material feeding as well as the labeling process itself as soon as an operator reaches into the protective field of the light curtain.
Furthermore, the same installation can be used to detect a material jam or products that have tipped over.

  • Simple wiring with standard M12 connectors
  • Ingress protection degree IP 65 + IP 67
  • Easy-to-use mounting brackets included

Pick-and-place robots
Many pick and place tasks are performed with the help of small robots, which represent a relatively modest hazard to staff. If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the robot arm movements can simply be stopped if an operator reaches into the process during operation.
This then protects very effectively both the operator and the machinery.

  • Cost-effective and safe solution
  • Robust mechanical design
  • Operating distance up to 12 m

Laser cutting machines with moving tables
Laser cutters with fast-moving tables holding the working pieces represent a risk to machine operators. A safety light curtain can be considered to prevent people from reaching into or entering the ongoing process. In case of intrusion during a potentially dangerous phase, table movement can be stopped promptly.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the protection is very effective. In addition, a direct view onto the working process is possible with no physical barriers that complicate access to the machine or finished parts.

  • Protective heights available from 150 mm to 1827 mm
  • Quick response time allows installation close to the working process
  • Mirror columns available for multi-side protection
Print PDF

Product name Product type + Safety level Datasheet
Contrinex product finder YBB-14K4-0150-G012

YBB-14K4-0150-G012

630-400-027

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0250-G012

630-400-028

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0400-G012

630-400-029

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0500-G012

630-400-030

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0700-G012

630-400-031

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0800-G012

630-400-032

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-0900-G012

630-400-033

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1000-G012

630-400-034

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1200-G012

630-400-035

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1300-G012

630-400-036

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1400-G012

630-400-037

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1600-G012

630-400-038

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14K4-1000-G012

YBB-14K4-1700-G012

630-400-039

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14R4-0150-G012

YBB-14R4-0150-G012

630-000-106

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14R4-0250-G012

YBB-14R4-0250-G012

630-000-107

 Light curtain, Cat. 4, PL e, Type 4
Contrinex product finder YBB-14R4-0250-G012

YBB-14R4-0400-G012

630-000-108

 Light curtain, Cat. 4, PL e, Type 4

Pressure & Temperature – Rugged Pressure and Temperature Switches for Nuclear Power Stations

/in , ,
  • For pneumatic or hydraulic control, power generation safety equipment and pressurized chambers control
  • Resistant to short duration overpressure
  • and show a good vibration resistance
  • Very good repeatability (±1% F.S.)
  • Comply with ATEX 94/9/CE requirements

With the series ZPN, ZDPN and ZT, Baumer offers very robust pressure and temperature switches developed especially for the use in nuclear power stations. The pressure switches are suitable for pneumatic or hydraulic control, for power generation safety equipment and for pressurized chambers control. They are resistant to short duration overpressure and show a good vibration resistance. The ZPN can measure a gauge pressure from -1 bar up to 600 bar with a very small intermediate range from -2 mbar up to 10 mbar. TheZDPN measures a differential pressure from 2 mbar up to 120 bar.
The pressure switches maintain a constant pressure around a chosen set value. When the pressure reaches a critical pre-set value, they trigger an alarm or safety system. A flexible diaphragm actuates a micro-switch via a piston. The set point adjustment is realized via a compressible spring mounted on the opposite. Due to the force-balance principle, the dead band setting remains constant, even with different setpoint adjustments. With rapid pressure variations, an attenuator should be used to prevent a temporary on and off switching.
The ZT temperature switches are suitable for all fluids and measuring ranges between -45°C and 350°C. They maintain a constant temperature around a chosen set value and act as a regulator of an alarm or safety system when the temperature reaches a critical pre-set value.
The pressure and temperature switches ZPN, ZDPN and ZT offer a very good repeatability (±1% F.S.) making them suitable for all demanding applications. The devices comply with ATEX 94/9/CE requirements for the use in hazardous areas, they are available in an intrinsically safe and an explosion-proof version. Approved by the French electricity board EDF, they are used in nuclear power stations all over the world.

Contrast sensors for print mark detection

/in , ,

Baumer’s new FKDK 14 contrast sensors for print mark detection are fast and accurate, making them the ideal, economical solution for print mark detection in packaging and printing machines. Utilizing white light as the light source, the FKDK 14 series can precisely detect print marks of all colors.
Optimized for high throughput speed, the new contrast sensor offers a response time down to 50 µs. This allows very short throughput times to be achieved.  At the same time, the contrast sensor is very compact and can be integrated easily into any machine. The 2-point teach-in procedure is simple and intuitive and can also be conducted dynamically during the process.
Since the light source is white light, the contrast sensor can reliably detect print marks of all colors, even with slight contrast to the background. The switching status is indicated with an LED, which is clearly visible through the transparent housing base of the contrast scanner.
The FKDK 14 is ideally suited for applications in packaging and graphic machinery. Providing an economical solution for print mark or printing plate detection, the FKDK 14 diffuse contrast sensor combines short response time and a compact housing with the unique white light source.
Find out more on the product page

/in , , , , , , , , ,

The robust cable transducers GCA5 are ideally suited for outdoor applications and cramped installation space.

The robust cable transducers GCA5 are ideally suited for outdoor applications and cramped installation space.

Sensor expert Baumer is further expanding their portfolio of cable transducers being the easiest, most reliable and cost-efficient way to measure linear motion within a path from 0.5 to 50 m. New series GCA5 is practice-proven when the going gets tough, for example at mobile machinery, and is ideally suited for use in cramped installation conditions.
The compact cable transducers of the GCA5 series do not compromise on maximum robustness in demanding applications. The housing of impact-resistant plastics, the corrosion-proof stainless steel cable with abrasion-resistant nylon sheath and the non-contact wear-free magnetic sensing make them the optimal choice for reliable and low-maintenance deployment in harsh environments. Thanks to the innovative design with three-chamber-principle, both electronics and stainless steel spring are hermetically encapsulated against the cable drum.  The integrated flexible dirt skimmer at the cable inlet is an additional protection against humidity and ingress of any other harmful environmental substance for maximum application reliability.
The cable transducers of the GCA5 series feature a maximum measuring range of 4700 mm and are available either with integrated CANopen interface or analog output 0.5…4.5 VDC. The CANopen variant provides additionally redundant position sensing and hence simplifies function monitoring at control level. Housing protection IP 67 (cable inlet IP 54), shock resistant up to 50 g, vibration proof up to 10 g and the extended temperature range from -40 to +85 °C make the cable transducers particularly robust and resistant against temperature fluctuations and all kinds of soiling.
The cable transducers of the GCA5 series excel by their narrow design and shallow installation depth of a mere 65 mm which allows easy installation even in cramped space – as prevailing in mobile machinery and utility or transport vehicles. Cable transducers series have been standing the test of time in outrigger positioning at mobile cranes and telehandlers as well as height positioning at floor conveyor trucks and stacker cranes. Whether as OEM equipment or for retrofit – the robust and compact cable transducers are ideal for precise measurement of linear motion in demanding applications.

View the entire line of Cable Transducers here:

https://andersoncontrol.com/shop/sensors/cable-transducer/

Inductive Factor 1 Sensors

/in , , , , , , , ,

sensorConstant distance towards any metal

Inductive Factor 1 sensors offer the great benefit of maintaining the same sensing distance towards all metals. Unlike standard sensors where this value changes, depending on the material. The benefits of Factor 1 sensors are obvious: This uniform distance offers outstanding flexibility in system conception and sensor installation. Contrary to conventional sensors, Factor 1 sensors feature enhanced sensing distance towards many different metals. Hence, they are even perfect for applications with variable objects.
Your benefit:

  • Utmost flexibility in construction and installation „
  • Uniform, large sensing distance towards any metal „
  • Shorter installation times, thanks to minimal adaptation effort „
  • Eased alignment thanks to large sensing distance „
  • Reduced sensor variety – the same sensor will match different applications

 
factor1
fast sense