Ski Lift Piece_Anderson Controls1

Heavy-Duty Rotary Encoders / Mill-Duty Incremental Encoders

Ideal for applications with dirty or high horsepower, large shaft motors. Our magneto-resistive technology is not affected by dirt, dust or dampness.  Choose from heavy duty rotary encodersmill duty incremental encoders and digital pulse tachs which provide high performance velocity and position feedback in extreme environments and on large motors.

NorthStar SLIM Tach ST56Heavy Duty Encoders

View Comparison Table

rimtachMill-Duty Encoders

View Comparison Table

RIMFV Voltage Converter

RIMFV Voltage Converter

  • Analog technology is outdated…Digital technology is modern and reliable!
  • Save time, save money, save space!
  • Both packages offer NorthStar digital tachometers

 

pdf_downlaodDownload Datasheet

 

pdf_downlaodView Manual

 

baumer-y09m03d27_240_5736938c7f374a451368ca98d9d98e73

Strain links – Force measurement made easy

Baumer Electric: DSRT strain links from Baumer are screwed onto the surfaces of machines that are under pressure. In these positions they detect linear strains. Thanks to a calibration of the complete system, the extension can be converted into a force. Since they only need to be screwed, strain links are easy to install.

Therefore, they provide a good alternative to strain gauges (S/G) that are glued directly onto the machine or to load cells that have to be integrated into the machine. This particular task often proves to be complicated and cost-intensive. Using a strain link can save between 40 and 90 minutes, compared to the glued S/G. The strain link can also be screwed onto the machine again easily after needing service.

The sensor is reliable with small as well as superimposed strains. The special geometry of the measuring element transforms the extension mechanically, which results in higher resolutions. Additionally, the optimized design of the measuring element allows to decouple bendings and torsions from the linear extension. Hence, they do not influence the measurement results. Due to an integrated amplifier, the design of the sensor is very compact. With the taring function of the amplifier the sensor can be reset at any time. Strain links are used for easy force measurements and overload cut-offs. Their main applications are presses and die cutters as well as machine tools or heavy vehicle construction.

Special features:

  • Strain sensors for screwing onto a surface
  • Specially optimized measuring element records extensions via full bridge
  • Torsions and bendings do not influence measurment results
  • Integrated amplifier with electric current or voltage output as well as CANopen interface