NEMA Rating and IP Code for Enclosure Types

NEMA Rating and IP Code for Enclosure Types

What is NEMA rating or NEMA codes? What does IP20 stand for? What is the difference between NEMA3R and NEMA4?
The below table would help you understand the story.
  • NEMA Rating and IP Code for Enclosure Types

    NEMA Rating and IP Code for Enclosure Types

NEMA stands for National Electrical Manufacturer Association. NEMA ratings are standards that are useful in defining the types of environments in which an electrical enclosure can be used. The NEMA rating system is defined by the National Electrical Manufacturer Association, and frequently signifies a fixed enclosure’s ability to withstand certain environmental conditions.
The IP Code (or International Protection Rating, sometimes also interpreted as Ingress Protection Rating) consists of the letters IP followed by two digits and an optional letter. As defined in international standard IEC 60529, it classifies the degrees of protection provided against the intrusion of solid objects (including body parts like hands and fingers), dust, accidental contact, and water in electrical enclosures. The first IP digit refers to solid objects and the second digit refers to liquids.
The inverter, charge controller or battery enclosures are usually referred with NEMA ratings. The IP code is rarely mentioned, especially for the junction box of solar modules or for indoor electrical devices. There is a NEMA rating table that goes from 1 to 13; however, only some of them are applicable in solar industry.
Here is a table that would help you with NEMA and IP codes:

NEMA IPxx Description
NEMA-1: General Purpose – Indoor IP20: Protection against solid objects up to 12mm. Type 1 enclosures are intended for use indoors, primarily to prevent accidental contact with the enclosed equipment, in areas where unusual service conditions do not exist.
NEMA-3: Dust tight, rain tight and sleet resistant – Outdoor IP64: Total protection against dust and protection against spray or water from every direction Type 3 enclosures are intended for use outdoors, to protect the enclosed equipment against windblown dust and water. They are not sleet (ice) proof.
NEMA-3R: Rainproof and sleet resistant – Outdoor IP22: Protection against solid objects over 12mm and against direct spray up to 15° from vertical. Type 3R enclosures are intended for use outdoors, to protect against rain, and meet the requirements of UL 508 “Rainproof enclosures”. They are not dust, snow nor sleet proof.
NEMA-4: Watertight and dust tight – Indoor and outdoor IP66: Total protection against dust and protection against strong jets of water. Type 4 enclosures are intended for use indoors or outdoors, to protect the enclosed equipment against splashing water, seepage of water, and severe external condensation. They are sleet resistant but not sleet (ice) proof.
NEMA-4X: Watertight and dust tight – Corrosion resistant – Indoor and outdoor IP66: Total protection against dust and protection against strong jets of water. Type 4X enclosures have the same provisions as Type 4 enclosures and, in addition, are corrosion-resistant.
NEMA-12: Industrial use, dust tight and drip tight – Indoor IP55: Protected against dust and protection against low pressure jets of water from every direction. Type 12 enclosures are intended for use indoors, to protect the enclosed equipment against fibres, flyings, lint, dust and dirt, and light splashing, seepage, dripping and external condensation of non-corrosive liquids.

Nitriding system for Automotive Ring Gears

automotive ring gearsNitrex Metal Inc. completed the installation of a new nitriding system at Korean heat treater Dongwoo HST Ltd.
The system is used primarily for processing Hyundai ring gears and includes 3 Nitreg®-based nitriding technologies for a number of steel types with process recipes for each product application.
Besides the ring gear business, another impetus for the recent purchase is for Dongwoo HST to meet the country’s growing appetite for advanced heat treatments that offer superior capabilities. Through an exclusive licensing deal, Dongwoo HST now offers Nitreg® potential-controlled nitriding, Nitreg®-C nitrocarburizing, Nitreg®-S nitriding of stainless steels, as well as ONC® in-process post-nitriding/nitrocarburizing oxidation.
The Nitrex furnace at the Dangjin site has a work zone of 39” diameter by 98” height (1000 mm x 2500 mm) and a gross load capacity of 6600 lbs (3000 kg).
Nitrex Metal currently has licensees in 16 countries.  Ask us how we can help you!