Eagle Signal manufactures electronic timer, electromechanical timer, and other devices. Within the electromechanical family is the HQ4 series of percentage timers. Percentage timers are a type of repeat cycle device that is compact and long-lasting. The HQ4 series is a unique timer that can function as an on delay, off delay, interval timer or repeat cycle device. Eagle Signal offers this accurate, economical, enclosed timer for a wide range of applications. Specifically, those where repetitive ON times of a fixed cycle requires adjustability. This series is a panel mounted unit with an exposed dial. The load relays’ seal protects against the environment. The HQ4 proves to be durable in industries such as chemical, feeding, irrigation controls, electric heaters, and motor controls. Recently, Eagle Signal developed an improved version of the HQ4 Series called the Cycl-Time® or CT4 Series.
CT4 series cycl-time percent timer/
The CT4 offers improved features including resolution, potentiometer, ease of setting, torque, safety, sealings, and wiring. Also, the Cycl-Time®’s resolution is more defined. For example, the colors of the faceplate offer more contrast for reading the time settings. With 100 ticks around the dial rather than 50, the CT4’s percentage options are more precise than the HQ4. The torque of the Cycl-Time® dial is more resistant to change than before. Once the timer is set, it will not rotate any further without intentional force from the user. These features combine to make the timer more accurate and easier to set. Safety is always the greatest concern when designing any product. The Cycl-Time® has a plastic guard over the terminal block to protect the user’s fingers from exposure to contractors. This percentage timer is ideal for applications environmental factors would usually cause concern. These features provide a longer lasting product and additional safety. The wiring and electrical connections of the HQ4 was also updated for the CT4. It now has four electrical connections, rather than seven, all in a straight line on the back of the body of the timer. As mentioned before, this timer is made to panel mounted. Eagle Signal continues to design the most accurate, economical, and reliable products in the industry. The HQ4 and Cycl-Time® Series are both exceptional devices fit for their specific applications. Cycl-Time® proves to be a respectable replacement option to the HQ4 Series.
https://andersoncontrol.com/wp-content/uploads/2019/01/electronice60c9d6e97e063d8ab44ff0000b4f631.jpg3501200heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2019-01-08 13:01:092019-01-11 10:50:07Benefits of Eagle Signal’s CT4 SERIES
For any machine requiring a fixed guard-door or cover, the YSR series ensures reliable state monitoring (door open or closed). Thanks to their serial connection capability, YSR types are particularly suitable for applications using multiple sensors, such as long packaging or assembly lines. These RFID-coded devices are classified type 4 according to ISO 14119.
RFID technology enables the user to assign a unique code to each sensor and actuator system, which greatly reduces the risk of tampering. YSR sensors can also be connected in series via the OSSD output and inputs, allowing up to 30 sensors to connect with just one relay or controller.
Since each sensor can provide individual feedback, it is possible to identify which guard-doors are open and which are closed. This is particularly useful when many sensors are connected in series.
The YSR series is part of a range of non-contact safety sensors used to monitor guard-doors, hoods or covers. Thanks to non-contact switching and coded RFID communication, the service life of these compact sensors is very long. Housings are ECOLAB-approved and rated to IP6K9K, making them suitable for washdown applications.
Safety level is category 4 according to ISO 13849-1.
https://andersoncontrol.com/wp-content/uploads/2018/05/566x281px_Safety_RFID.jpg281566heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2018-05-11 09:30:262019-05-14 11:25:30Magnetically or RFID-coded safety sensors provide contactless security for doors, hoods and flaps
For any machine requiring a fixed guard-door or cover, the YSM series ensures reliable state monitoring (door open or closed). A magnetically coded system (type 4 according to ISO 14119) makes the YSM series immune to mutual interference and highly resistant to tampering. It is also possible to mount the actuator behind a stainless steel plate, which further reduces accessibility.
The YSM series is part of a range of non-contact safety sensors used to monitor guard-doors, hoods or covers. Thanks to non-contact switching and coded communication, the service life of these compact sensors is very long. Housings are ECOLAB-approved and rated to IP6K9K, making them suitable for washdown applications.
Safety level is category 4 according to ISO 13849-1.
https://andersoncontrol.com/wp-content/uploads/2018/05/566x281px_Safety_magnetic.jpg281566heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2018-05-11 08:59:452019-05-14 11:13:05Safety Magnetic Sensors
To speed up delivery to our North American customers, Contrinex is now manufacturing our highly popular SAFETINEX line of light curtains in the USA! Each Safetinex product is hand-assembled, tested for quality and accuracy, pressurized and verified right in our newly expanded Texas location. Call (866) 289 2899 to order your kit today.
The newly developed YBB Type 2 series comprises a complete range of 30 mm resolution hand protection devices for all your Type 2, PL c, SIL 1 applications.
The rugged aluminum housing and PMMA screen are suitable for applications in almost any kind of industrial environments. Quick and simple installation is achieved by 5-pin M12 connector, integrated alignment aids, and the mounting brackets also included.
Robust housing
Simple wiring and installation
Protective heights from 150 mm to 1827 mm
Operating distance up to 12 m
TECHNICAL DATA
Supply voltage: 24 VDC +/-20%
Protection class: IP 65 + IP 67
Operating temperature: 0…50°C
Safety rating: Type 2, category 2, PL c, SIL 1
Resolution: 30 mm
Output: 2 x PNP
Certification: TÜV SÜD, CE
Labeling machines
For the operators of fully automated product labeling machines, the hazard involved is mostly slight.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, a protected machine opening can be used to interrupt the conveyor or material feeding as well as the labeling process itself as soon as an operator reaches into the protective field of the light curtain.
Furthermore, the same installation can be used to detect a material jam or products that have tipped over.
Simple wiring with standard M12 connectors
Ingress protection degree IP 65 + IP 67
Easy-to-use mounting brackets included
Pick-and-place robots
Many pick and place tasks are performed with the help of small robots, which represent a relatively modest hazard to staff. If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the robot arm movements can simply be stopped if an operator reaches into the process during operation.
This then protects very effectively both the operator and the machinery.
Cost-effective and safe solution
Robust mechanical design
Operating distance up to 12 m
Laser cutting machines with moving tables
Laser cutters with fast-moving tables holding the working pieces represent a risk to machine operators. A safety light curtain can be considered to prevent people from reaching into or entering the ongoing process. In case of intrusion during a potentially dangerous phase, table movement can be stopped promptly.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the protection is very effective. In addition, a direct view onto the working process is possible with no physical barriers that complicate access to the machine or finished parts.
Protective heights available from 150 mm to 1827 mm
Quick response time allows installation close to the working process
Mirror columns available for multi-side protection
The compact GIM500R inclination sensors in robust aluminum housing are ideal for use in harsh environments.
When it comes to tough outdoor use, many sensors reach their limits. Inclination sensors by sensor expert Baumer stand for maximum reliability and durability even in a harsh environment. Thanks to the extremely robust and resilient design, the new GIM500R sensors are ideal for outdoor applications in mobile automation and ensure maximum system uptime.
The GIM500R inclination sensors excel by ultra-high accuracy up to ±0.1˚ for absolute reliability and precise positioning. The E1-compliant and uncompromising design with optimal EMC properties, IP 69K protection and corrosion resistance up to C5-M is particularly addressing demanding outdoor applications. Their shock and vibration resistance up to 200 g respectively 20 g and the wide temperature range from +85 down to -40°C make the inclination sensors particularly durable in temperature fluctuations and any type of soiling. The integrated EN13849-compliant firmware meets the highest requirements on reliability which allows for standard components to be used in functional safety systems up to PLd level. Another hallmark of the new series is optional redundant system design where required.
Inclination sensors of the GIM500R series stand out by their compact aluminum housing, high cost-efficiency and maximum flexibility in system design. They fit in the confined installation space prevailing in mobile automation and heavy vehicles.
Press download
Inclination sensors – angular measurement in harsh environments:
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.
Benefits of Eagle Signal’s CT4 SERIES
/in Industries, New Technology, News & Events, Products, Waterby Haleigh Rozier | May 22, 2018
Eagle Signal manufactures electronic timer, electromechanical timer, and other devices. Within the electromechanical family is the HQ4 series of percentage timers. Percentage timers are a type of repeat cycle device that is compact and long-lasting. The HQ4 series is a unique timer that can function as an on delay, off delay, interval timer or repeat cycle device. Eagle Signal offers this accurate, economical, enclosed timer for a wide range of applications. Specifically, those where repetitive ON times of a fixed cycle requires adjustability. This series is a panel mounted unit with an exposed dial. The load relays’ seal protects against the environment. The HQ4 proves to be durable in industries such as chemical, feeding, irrigation controls, electric heaters, and motor controls. Recently, Eagle Signal developed an improved version of the HQ4 Series called the Cycl-Time® or CT4 Series.
CT4 series cycl-time percent timer/
The CT4 offers improved features including resolution, potentiometer, ease of setting, torque, safety, sealings, and wiring. Also, the Cycl-Time®’s resolution is more defined. For example, the colors of the faceplate offer more contrast for reading the time settings. With 100 ticks around the dial rather than 50, the CT4’s percentage options are more precise than the HQ4. The torque of the Cycl-Time® dial is more resistant to change than before. Once the timer is set, it will not rotate any further without intentional force from the user. These features combine to make the timer more accurate and easier to set. Safety is always the greatest concern when designing any product. The Cycl-Time® has a plastic guard over the terminal block to protect the user’s fingers from exposure to contractors. This percentage timer is ideal for applications environmental factors would usually cause concern. These features provide a longer lasting product and additional safety. The wiring and electrical connections of the HQ4 was also updated for the CT4. It now has four electrical connections, rather than seven, all in a straight line on the back of the body of the timer. As mentioned before, this timer is made to panel mounted. Eagle Signal continues to design the most accurate, economical, and reliable products in the industry. The HQ4 and Cycl-Time® Series are both exceptional devices fit for their specific applications. Cycl-Time® proves to be a respectable replacement option to the HQ4 Series.
CT4 Series CYCL-TIME Percent Timer
Magnetically or RFID-coded safety sensors provide contactless security for doors, hoods and flaps
/in Automotive, Beverage and Food, Elevators, Factory Automation, Hydraulics, Industries, Medical, Pharmaceutical, Printing, RoboticsFor any machine requiring a fixed guard-door or cover, the YSR series ensures reliable state monitoring (door open or closed). Thanks to their serial connection capability, YSR types are particularly suitable for applications using multiple sensors, such as long packaging or assembly lines. These RFID-coded devices are classified type 4 according to ISO 14119.
RFID technology enables the user to assign a unique code to each sensor and actuator system, which greatly reduces the risk of tampering. YSR sensors can also be connected in series via the OSSD output and inputs, allowing up to 30 sensors to connect with just one relay or controller.
Since each sensor can provide individual feedback, it is possible to identify which guard-doors are open and which are closed. This is particularly useful when many sensors are connected in series.
The YSR series is part of a range of non-contact safety sensors used to monitor guard-doors, hoods or covers. Thanks to non-contact switching and coded RFID communication, the service life of these compact sensors is very long. Housings are ECOLAB-approved and rated to IP6K9K, making them suitable for washdown applications.
Safety level is category 4 according to ISO 13849-1.
Download datasheets:
Safety Magnetic Sensors YSM-xxK4-MxxN-xxxx
Safety RFID Sensors YSR-xxK4-xESE-xxxx
YSR-22K4-RESE-C050
605-000-760
YSR-22K4-RESE-P012
605-000-762
YSR-22K4-TESE-C050
605-000-761
YSR-22K4-TESE-P012
605-000-763
Safety Magnetic Sensors
/in Beverage and Food, Factory Automation, Industries, Medical, Pharmaceutical, PrintingThe YSM series is part of a range of non-contact safety sensors used to monitor guard-doors, hoods or covers. Thanks to non-contact switching and coded communication, the service life of these compact sensors is very long. Housings are ECOLAB-approved and rated to IP6K9K, making them suitable for washdown applications.
Safety level is category 4 according to ISO 13849-1.
Download datasheets:
Safety Magnetic Sensors YSM-xxK4-MxxN-xxxx
Safety RFID Sensors YSR-xxK4-xESE-xxxx
Available Products
YSM-22K4-MEAN-C050
605-000-751
YSM-22K4-MEAN-P012
605-000-755
YSM-22K4-MEFL-C050
605-000-771
YSM-22K4-MEFN-C050
605-000-749
YSM-22K4-MEFN-P012
605-000-753
YSM-22K4-MSAN-C050
605-000-750
YSM-22K4-MSAN-P012
605-000-754
YSM-22K4-MSFN-C050
605-000-748
YSM-22K4-MSFN-P012
605-000-752
YSM-78K4-MEAN-C050
605-000-757
YSM-78K4-MEAN-P012
605-000-759
YSM-78K4-MEFL-C050
605-000-772
YSM-78K4-MEFN-C050
605-000-756
YSM-78K4-MEFN-P012
605-000-758
SAFETINEX light curtains
/in Aerospace and Defense, Automotive, Beverage and Food, Factory Automation, Industries, Medical, Pharmaceutical, Printing, Products, Pulp and Paper, RoboticsTo speed up delivery to our North American customers, Contrinex is now manufacturing our highly popular SAFETINEX line of light curtains in the USA! Each Safetinex product is hand-assembled, tested for quality and accuracy, pressurized and verified right in our newly expanded Texas location. Call (866) 289 2899 to order your kit today.
WATCH VIDEO NOW…
The newly developed YBB Type 2 series comprises a complete range of 30 mm resolution hand protection devices for all your Type 2, PL c, SIL 1 applications.
The rugged aluminum housing and PMMA screen are suitable for applications in almost any kind of industrial environments. Quick and simple installation is achieved by 5-pin M12 connector, integrated alignment aids, and the mounting brackets also included.
TECHNICAL DATA
Labeling machines
For the operators of fully automated product labeling machines, the hazard involved is mostly slight.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, a protected machine opening can be used to interrupt the conveyor or material feeding as well as the labeling process itself as soon as an operator reaches into the protective field of the light curtain.
Furthermore, the same installation can be used to detect a material jam or products that have tipped over.
Pick-and-place robots
Many pick and place tasks are performed with the help of small robots, which represent a relatively modest hazard to staff. If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the robot arm movements can simply be stopped if an operator reaches into the process during operation.
This then protects very effectively both the operator and the machinery.
Laser cutting machines with moving tables
Laser cutters with fast-moving tables holding the working pieces represent a risk to machine operators. A safety light curtain can be considered to prevent people from reaching into or entering the ongoing process. In case of intrusion during a potentially dangerous phase, table movement can be stopped promptly.
If the result of the risk assessment allows the use of a Type 2 / PL c / SIL 1 safety light curtain, the protection is very effective. In addition, a direct view onto the working process is possible with no physical barriers that complicate access to the machine or finished parts.
Related Solutions
SPECIAL PURPOSE MACHINES
YBB-14K4-0150-G012
630-400-027
YBB-14K4-0250-G012
630-400-028
YBB-14K4-0400-G012
630-400-029
YBB-14K4-0500-G012
630-400-030
YBB-14K4-0700-G012
630-400-031
YBB-14K4-0800-G012
630-400-032
YBB-14K4-0900-G012
630-400-033
YBB-14K4-1000-G012
630-400-034
YBB-14K4-1200-G012
630-400-035
YBB-14K4-1300-G012
630-400-036
YBB-14K4-1400-G012
630-400-037
YBB-14K4-1600-G012
630-400-038
YBB-14K4-1700-G012
630-400-039
YBB-14R4-0150-G012
630-000-106
YBB-14R4-0250-G012
630-000-107
YBB-14R4-0400-G012
630-000-108
Angular measurement in harsh environments
/in Aerospace and Defense, Agriculture, Automotive, Beverage and Food, Elevators, Factory Automation, Hydraulics, Industries, Medical, Medical Imaging, News & Events, Nuclear, Off Highway Vehicle, Oil and Gas, Pharmaceutical, Products, Railroad, Robotics, Servo Motors, Vector Motor, Wind EnergyThe compact GIM500R inclination sensors in robust aluminum housing are ideal for use in harsh environments.
When it comes to tough outdoor use, many sensors reach their limits. Inclination sensors by sensor expert Baumer stand for maximum reliability and durability even in a harsh environment. Thanks to the extremely robust and resilient design, the new GIM500R sensors are ideal for outdoor applications in mobile automation and ensure maximum system uptime.
Press download
Inclination sensors – angular measurement in harsh environments:
Picture :
Further information
Inclination sensors
Inclination / Acceleration sensors
Call for more information 800-699-0290