TG410 Generator Controller – DynaGen

Description

The DynaGen TG410 is a rugged, full‑featured generator controller designed for reliable three‑phase monitoring, autostart capability, and advanced engine/generator management. It supports both mechanically and electronically governed engines and includes an isolated Modbus port for remote annunciation and internet‑based monitoring.

The DynaGen TG410 provides three‑phase voltage and current metering, 9 inputs, and 6 outputs, making it suitable for both mobile and stationary equipment where reliability is essential.

🏠 Housing

• Conformal coating protects internal electronics from moisture and contaminants.
• The front-panel gasket helps prevent water ingress during panel mounting.

📟 Display & Monitoring

The controller provides clear visibility into key engine and generator parameters, including:

• Oil pressure and engine temperature
• Fuel and oil levels
• Hour meter
• RPM
• Battery voltage
• Real‑time clock with date/time
• J1939 DTC codes
• DPF/DEF status icons
• J1939 percent load and percent torque
• Custom screens for pumping or compressor applications
• Power factor, apparent power, real power, and reactive power metering

🖥 RapidCore Software

The RapidCore_software interface allows users to:

• Configure controller settings
• Customize CANbus parameters
• Adjust operational logic
• Download diagnostic information (Software updates available from the manufacturer.)

⚙ Autostart Functions

• Autostart on low battery
• Automatic shutdowns and warnings
• Manual or remote start
• Autostart triggered by sensor values (pressure, temperature, level, voltage)

🔩 Functional Capabilities

• Weekly scheduler
• Maintenance counter
• Preheat and configurable timers
• Stall detection
• Retry on false start
• Custom warnings and failures
• Configurable DTC behavior
• Load imbalance detection
• IDMT overcurrent protection
• Exercise clock
• 150‑event log for diagnostics

⚡ Speed Control

• Speed offset adjustment for electronic engines
• RPM via J1939
• Magnetic pickup support
• Configurable RPM setpoint output

🔁 Closed‑Loop Control

• Supports closed‑loop control using custom sender inputs

🔌 Communications

• CANbus J1939
• RS‑485 (Modbus) with galvanic isolation for safe remote connectivity

🔧 Inputs / Outputs

• 4 analog inputs
• 5 digital inputs
• 6 switched outputs

🏅 ISO Certification

Manufactured under an ISO 9001:2015‑certified quality system.