Pump Jack Monitoring

/in , , ,

Pump Jack monitoring makes your operation more efficient and cost effective by monitoring On/Off events, following trends, and sending alarms. Ensure quick resolution of asset repair or maintenance and keep downtime to a minimum.
Features:

  • Remotely monitor pump jacks to detect and report On/Off events
  • Receive alarms when the motor stops and cannot restart
  • Monitor controller outputs to report control events including Modbus registers for operational parameters
  • Remotely control the pump jack
  • Remotely retrieve pump cards
  • Can integrate with most controllers
  • Can accommodate different power requirements-site power, battery, or solar with battery backup
  • Monitor multiple pump jacks or multiple assets with one AMCi monitoring system

Benefits:

  • Get instant notifications that the pump jack has shutdown unexpectedly
  • Respond quickly to shutdown events to resolve problems and get oil pumping again
  • Accurately report pump jack uptime and demonstrate contract compliance
  • If using portable equipment, and integrated GPS receiver can quickly provide the pump jack location
  • Alarms can be sent via email, text message, or phone call
  • View the status of all equipment from your desktop with AMCi’s SatAlarm-Server host application

From simple On/Off event reporting to complex controller monitoring, AMCi has a solution to meet the customer’s specific needs. Contract AMCi to let us find the best and most cost effective solution for your monitoring requirements.

Shop by product

Shop by category

TankAlert

/in , , , ,

SatAlarm -TankAlert

Our tank float switch kit turns a Sentry68, SMU68, or IDP680 into an instant tank level alarm.

  • The float is dropped into the tank from above through a standard 4” inspection port or bung
  • A friction collar allows the float to be set at the desired height within the tank
  • Single- or multi-level floats are available in variety of materials for almost any production or product tank
  • No external power source is required, making this application truly infrastructure independent and very easy to install
  • Sense multiple levels with one float
  • Totally self-contained satellite unit
  • Battery, solar or site powered
  • Installs in minutes

SatAlarm-Server Web Application

SatAlarm-Server is internet-based and is for users and administrators to see and interact with their remote equipment.

  • No special software required
  • Password protected website
  • Generate & print reports
  • Export data files
  • Full mapping features
  • Last known status
  • Poll for data and location
  • Route to mapping features
  • Unlimited electronic alarm notifications
  • Works with AMCi’s 24/7 live-operator call center

Call for more information: +1-865-789-6085

SatAlarm tank amci

Eagle Signal BRE Reset Timer – Anderson Controls Incorporated

/in

eagsigbreBRE timers feature enclosed construction with front facing dial and knob and a heavy duty terminal block, with 9 screw terminals that will readily accept 16 gauge wire commonly used in industrial circuit wiring. The case of the BRE series timer is injection molded Lexan®. This material is recognized by Underwriters Laboratories for use as the sole support of current carrying components. Lexan is self-extinguishing, has a high impact strength, and high dimensional stability.BRE timers are available in 11 different time ranges and 120 to 240VAC, 50/60Hz. The NEW BRE series reset timers are microprocessor driven. They provide an accurate adjustable time delay between the actuation of the control circuit and the operation of the load switches. New standard pilot light is on during timing period.

Source: Eagle Signal BRE Reset Timer – Anderson Controls IncorporatedAnderson Controls Incorporated

United Process Controls Announces 'HOT FOR THE CAUSE' Partnership with NBCF

/in

NOTICE SOMETHING DIFFERENT ABOUT THE QUICKSILVER OXYGEN SENSOR?

UPC has launched a special-edition  QuickSilver probe to raise money for breast cancer research.
With the purchase of each new QuickSilver, a donation will be made to the National Breast Cancer Foundation (www.nbcf.org).
All donations go to fund research for a cure and programs for patients and their families.


The QuickSilverTM provides state-of-the-art features in a cost-effective package

This reliable oxygen probe is suitable for use in carburizing, carbonitriding, neutral hardening and generator applications.

Features and Benefits

  • Thermal Shock Resistant – Installs in seconds instead of 1″ (25.4 mm) every 2 minutes like older technologies
  • Patented AccusenseTM provides industry-leading accuracy while resisting sooting
  • CPI burn-off (air purge) fitting is standard for maximum safety
  • Every probe is 100% furnace tested and certified
  • Response time < 1.0 second
  • S, K, or R type T/C’s available
  • Insertion lengths of 23.6″ (600 mm), 31.5″ (800 mm) or 39.4″ (1,000 mm)
  • Low rebuild cost
  • Standard 12 month warranty
  • Corrosion-proof quick connect XLR standard with adapters for any connection

General information
Compatible with all competitive plug-in connectors, this reliable oxygen probe is ideal for use in carburizing, carbonitriding, neutral hardening and generator applications.


Digital Thermostats for Refrigeration and Heating Applications

/in , ,

New Digital Thermostats will Improve the Performance of Refrigeration and Heating Applications

West Control Solutions has launched the CAL Thermostats family, a range of easy-to-use temperature thermostats that improve performance and efficiency for food and beverage manufacturers. With a simple user interface, large clear display and a high ingress protection-rated casing, CAL Thermostats offer precision monitoring of temperatures within ovens, fryers, refrigerators and other chillers.

Digital Thermostats with NTC Sensor InputSelf-Tuning Digital Thermostat

The CAL ET2011 digital thermostat is an easily programmable standard thermostat for heating or cooling control, with a 4-digit display. A simple panel clamp enables quick installation and release, while a range of input options for thermocouples or PT100 provides capability to meet a wide range of application requirements. The automatic, ‘self-tuning’ calculation of PID parameters, soft-start functionality and the option for relay or SSR output to be assigned as the main control output all contribute to the flexibility and efficiency of the instrument.

Defrost Thermostats for Compressor Defrost or Fan Control

For refrigeration applications where defrost is required, the CAL EDT defrost thermostats offer different output options for compressor defrost or fan control, up to two NTC thermistor sensor inputs and an option for an external digital input to trigger a defrost event. The devices support different defrost cycles: compressor shutdown, electric or hot gas defrost cycles. Fast set-up is enabled using the “CAL key”, a flash memory key that allows configuration settings to be copied from a master device to any further devices that share the same configuration, saving time and ensuring commissioning or down time is minimised. An RS485 option is available for monitoring and reporting, while a real-time clock for initiating the defrost cycle at a specific time of day.
The CAL thermostat range provides an aesthetically-pleasing design featuring a large display that is ideal for both industrial and non-industrial applications.
Call us to discuss your application – ANDERSON CONTROLS       800-699-0290