AirGate 4G Lite IoT Industrial Gateway

Description

AirGate 4G Lite is a cost-effective industrial IoT Gateway. It uses the 4G network and guarantees secure remote access to distributed applications. It has the most common encryption protocols and firewall functions in most IT infrastructures, including automatic fallback to 4G, 3G, and 2G networks if one of the networks that is within range is downlinked.

It has 1 slot for a dual SIM card that guarantees operator redundancy and an automatic failover function, 1 Ethernet port, and RS485 / RS232 interfaces with native Modbus RTU protocol. With excellent flexibility, it can operate with any other communication protocol on any interface. Easy to install and configure, it can be managed with local or remote access via the web. High performance at extended operating temperatures and CE Mark certification ensure the robustness and reliability of the device in industrial applications. Designed for remote access, it simplifies the device access architecture. In addition, AirGate 4G Lite, operating as a master in a Modbus RTU network, allows you to read many process variables and send configurable alerts by SMS or e-mail.

Ready for use with IoT platforms, it guarantees data communication with a secure MQTT. This makes it possible to send data from devices on legacy networks to cloud systems.

– Cellular Interface:
4G LTE: LTE FDD, LTE TDD
3G UMTS: DC-HSDPA, HSUPA, WCDMA
2G GSM: EDGE, GPRS

– Ethernet interface:
Standard: IEEE 802.3, IEEE 802.3u
2 x 10/100 Mbps port, RJ45 connector
1.5KV Magnetic Isolation Protection

– Serial Interface:
1 x RS232 (3 connectors): TX, RX and GND
1 x RS485 (2 connectors): D1 and D0
Baud Rate: 300 bps to 115,200 bps
15 KV ESD Protection

– LEDs:
1 x SYS
1 x NET
1 x USR
3 x RSSI

– Software:
Network protocols: DHCP, ICMP, PPPoE, HTTP, HTTPS, DNS, VRRP, NTP, MQTT, FTP, TCP, Modbus RTU master, Modbus TCP client
VPN: IPSec, GRE, OpenVPN and DMVPN
Policies: RIPv1 / RIPv2 / OSPF / BGP (optional)
Firewall and Filter: Port forwarding, DMZ, anti-DoS and ACL
Serial port: TCP and UDP
Management: Web Interface

– Alarms:
SMS and email

– Power supply:
Connector: 7 pin 3.5 m, female
Input voltage range: 9 to 36 VDC
Power consumption: idle: 50 mA at 12 V | data connection: 2 mA (peak) @ 12 V.

– Dimensions:
82.8mm x 93.3mm x 28.8mm (excluding antenna)

– Mounting: DIN rail

– Environment:
Operating temperature: -40 to 75 °C
Storage temperature: -40 to 85 °C
Operating humidity: 5 to 95% non-condensing

– Aluminum Housing: 300g

– Degree of Protection: IP30

– Certification: CE Mark; UKCA; Anatel (13384-23-12560); RoHS