The flexibility and profiling power of the CAL 9500P temperature controller has provided an exceptionally powerful solution for Active Magnetic Inspection Inc. (AMI), a US company that treats and inspects fasteners for the aerospace industry.
Process & Temperature Control Requirements
AMI performs plating, stripping, stress relief and magnetic particle inspection processes for fastener manufacturers. In the aerospace industry, which is highly regulated due to the extreme need for safety, manufacturing precision is key and a business such as AMI depends on meeting quality control requirements. In order to achieve this, a precise level of process control and accurate record-keeping is required.
AMI had decided to raise the bar and establish a process system that would earn accreditation from Nadcap (National Aerospace and Defense Contractors Accreditation Program) and thus enable the company to strengthen its position in the aerospace fastener business. To meet this need, AMI’s systems were enhanced by temperature controllers from West Control Solutions.
The Design & Construction Process
AMI enlisted the services of R.J. “Skip’ Schaefer of Titan Industrial Heating Systems, an expert in the design and construction of temperature-controlled manufacturing processes. Skip’s task was challenging as many points of control were required. These included two stress relief ovens that each required monitoring of 60 product containers.
In order to achieve Nadcap accreditation it was also necessary to establish a thorough quality system, including well-documented process instructions and complete records for all production lots including time and temperature data, to meet the needs of the annual audit. “The customer needed to provide 100% traceability on its output,” Skip explained. “I’ve been using CAL temperature controllers for around 25 years and I can count the number of failures on one hand so it had to be CAL. Aside from the reliability and durability of the CAL product, West Control Solutions are also very helpful with background information when I’m planning a system build.”
The CAL 9500P process controller was chosen as the front end for its flexibility and profiling power. In order to satisfy Nadcap process data requirements, all of the instruments are tied to a central PC that runs CALGrafix. The result is that every point is monitored and stored on a minute-by-minute basis.
The Results
When the process system was inspected by Nadcap, the results were outstanding and AMI was issued with its certificate, enabling AMI to strengthen its position in the aerospace fastener business.
“There have been zero flaws in the system,” Skip said. “That’s with two ovens: one with 36 controls and one with 34, both working 24 hours a day, seven days a week. A system such as this requires absolute reliability and CAL controllers have guaranteed that.”
00heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2013-06-28 16:05:272013-06-28 16:05:27CAL Controllers Boost Business for Aerospace Component Processor
CAL temperature controllers from West Control Solutions are helping laboratory OEMs to provide the best possible conditions for research into the treatment of diseases such as cancer.
In particular, the CAL 3300 temperature controller is providing outstanding service in controlling the performance of an incubation chamber for laboratory equipment manufacturer, Solent Scientific.
Solent Scientific and the Application
The 37 Climate Chamber from Solent Scientific is an acrylic enclosure integrated with a powerful microscope, which is used to conduct prolonged studies of living cells, usually involving time lapse image capture. These enclosures can also exclude light when working with low level light microscopy. Warm, filtered air circulates within the enclosure from a heater unit and the precise temperature within the chamber is controlled by a CAL 3300 unit.
With temperature control a critical feature of the incubation chamber, Solent Scientific turned to West Control Solutions, which has established a strong reputation across industry for providing exceptionally reliable temperature controllers that perform over long periods within extremely tight tolerances.
Temperature Control Requirements
Orry Dugdale, Director, Solent Scientific, explained further how the 37° Incubation Chambers work and why the CAL 3300 provided an ideal solution for temperature control. “When we built the incubator, we were trying to create a cell culturing system that accurately replicates conditions within the human body, and that means maintaining a constant temperature. The temperature requirement for the chamber is 37° degrees, + 0.1°C. The temperature must be accurate and within that tight tolerance. The CAL 3300 is proven to be capable of delivering that, day after day, year after year.”
Selecting the Right Temperature Controller
The CAL 3300 is easy to operate, with a large 4-digit green LED display clearly showing the-current temperature, and a parameter security-locking feature that prevents the operator from inadvertently changing the settings.
The CAL 3300 brings ease-of-use to the customers of OEMs such as Solent Scientific by offering integrated auto-tune PID control (Proportional Integral Derivative). This means that users do not have to programme parameters manually, a task that requires a certain amount of technical knowledge, and reduces set up time to a few minutes.
Using PID Control
The PID facility is further enhanced by a unique dAC (Derivative Approach Control) function, which prevents control temperature overshoot during warm up. CAL has developed dAC functions outside of the proportional band during warm up by widening the proportional band. The temperature rise is slowed during this period and when the temperature falls within the original proportional band, the controller reverts back to normal operation. The result is a steady temperature rise with minimal overshoot, which can be critical when maximum temperatures must not be exceeded.
West Control Solutions has also provided Solent Scientific with a cost-efficient method of logging temperature over a period of time, a facility that was required in order to test the operation of each incubator. By using the communication software for real-time logging of CAL controllers, Solent Scientific could prove that the temperature within the incubator was kept to + or – 0.1°C over long periods of time, which is well within the tolerances required for the application. This solution avoided the considerable cost and development involved in employing SCADA (Supervisory Control And Data Acquisition) packages.
The 37° Incubation Chambers are making a major contribution to the life sciences, with sales to universities and research institutes across the globe. “Imperial College in London was our first customer in 1997,” Orry Dugdale explained. “When I visited London in 2012, the chamber was still working and I can think of no better recommendation for CAL controllers.”
00heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2013-06-27 19:06:082013-06-27 19:06:08CAL Temperature Controllers Enhance Quality of Medical Research
Last month UPC put an end to clipboard rounds for a south central US energy equipment supplier. The company who depended on operators to check local furnace readings and record data manually opted instead for a major upgrade of its heat treating operations that included new multi-furnace controls and a more efficient data collection setup.
The furnace control systems equipped with Protherm 400 controllers manage twelve furnaces – continuously controlling, monitoring and archiving furnace and oil temperatures, carbon, as well as maintenance functions such as agitator and fan motor currents, and quench transfer time. To maximize data reliability and meet strict data retention requirements, data logging is performed both locally at the furnace control panel by the Protherm 400s and at a central location by the Protherm 9800, a production management software that gives users online access to real-time data from the furnace control systems. Users can also view and analyze historical data from each furnace, and monitor and address alarms.
About the upgrade: Furnace control systems incorporate UPC Protherm 400s, KD-7 paperless chart recorders, and RE-19 controllers.
To meet the demanding requirements associated with processing and packaging food products, Baumer offers a broad portfolio of photoelectric, liquid level, inductive, and ultrasonic hygienic sensors designed to withstand chemicals and/or high pressure washdowns.
For volume measurement in meat and cheese processing, Baumer’s OADR 20 series of laser sensors provides a high degree of accuracy and resolutions from 5 µm. Encased in a stainless steel housing, these sensors feature Baumer’s unique proTect+ impermeability design to ensure compliance with protection class IP68/IP69K, even after repeated temperature cycles.
Used to detect food items or packages on conveyor belts, Baumer Series 14 hygienic photoelectric sensors are available in standard models and in a version featuring SmartReflect™, an award-winning light barrier that operates without a reflector and has a sensing distance of 800 mm.
In liquid level measurement applications, Baumer CleverLevel sensors are outstanding alternatives to vibrating fork switches. Certified according to FDA, EHEDG, and 3A guidelines, these sensors offer 1.4404 stainless steel housings, matching PM023 weld-in boss, and PEEK plastic sensor tips that protrude only 18 millimeters into the container or tube to avoid flow blockage. LBFS versions feature standard output configurations and operate from -40 to +115°C, while LFFS versions withstand operating process temperatures from -40 to +200°C and are programmable using a separately ordered Flexprogrammer.
For presence detection in food processing machinery, the Baumer IFBR and IFRR series of inductive sensors feature corrosion-resistant materials, flush connections and smooth, continuous or sealed surfaces. The sensors withstand increasingly frequent and intense cleaning and disinfection cycles, and are Ecolab-tested and EHEDG-certified.
Designed to handle challenging food packaging applications, Baumer’s UNAR 18 series of ultrasonic sensors feature stainless steel housings with a parylene coating for increased chemical resistance. The switching output version enables the sensor to detect the presence of items such as cups or bottles, while the measuring version of the UNAR 18 is well-suited for non-contact level measurement and control in filling machines.
Baumer Hygienic Sensors for Food Processing and Packaging
00heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2013-06-24 18:45:142013-06-24 18:45:14Baumer Hygienic Sensors for Food Processing and Packaging
For more than 80 years R. STAHL has fulfilled a unique role in protecting lives and property in harsh and hazardous (classified) locations.
This Stahl EX cabinet installation build included a great many components that where build to the customers specifications and designed by Stahl for international use. Let us build one for you! Call +1 800 699 0290.
00heykevinhttps://andersoncontrol.com/wp-content/uploads/2024/07/anderson-control-logo.webpheykevin2013-06-24 18:02:202013-06-24 18:02:20Stahl EX Cabinet Control system for Hazardous Locations – Worldwide installations
We may request cookies to be set on your device. We use cookies to let us know when you visit our websites, how you interact with us, to enrich your user experience, and to customize your relationship with our website.
Click on the different category headings to find out more. You can also change some of your preferences. Note that blocking some types of cookies may impact your experience on our websites and the services we are able to offer.
Essential Website Cookies
These cookies are strictly necessary to provide you with services available through our website and to use some of its features.
Because these cookies are strictly necessary to deliver the website, refusing them will have impact how our site functions. You always can block or delete cookies by changing your browser settings and force blocking all cookies on this website. But this will always prompt you to accept/refuse cookies when revisiting our site.
We fully respect if you want to refuse cookies but to avoid asking you again and again kindly allow us to store a cookie for that. You are free to opt out any time or opt in for other cookies to get a better experience. If you refuse cookies we will remove all set cookies in our domain.
We provide you with a list of stored cookies on your computer in our domain so you can check what we stored. Due to security reasons we are not able to show or modify cookies from other domains. You can check these in your browser security settings.
Other external services
We also use different external services like Google Webfonts, Google Maps, and external Video providers. Since these providers may collect personal data like your IP address we allow you to block them here. Please be aware that this might heavily reduce the functionality and appearance of our site. Changes will take effect once you reload the page.
Google Webfont Settings:
Google Map Settings:
Google reCaptcha Settings:
Vimeo and Youtube video embeds:
Privacy Policy
You can read about our cookies and privacy settings in detail on our Privacy Policy Page.
CAL Controllers Boost Business for Aerospace Component Processor
/in News & EventsThe flexibility and profiling power of the CAL 9500P temperature controller has provided an exceptionally powerful solution for Active Magnetic Inspection Inc. (AMI), a US company that treats and inspects fasteners for the aerospace industry.
Process & Temperature Control Requirements
AMI had decided to raise the bar and establish a process system that would earn accreditation from Nadcap (National Aerospace and Defense Contractors Accreditation Program) and thus enable the company to strengthen its position in the aerospace fastener business. To meet this need, AMI’s systems were enhanced by temperature controllers from West Control Solutions.
The Design & Construction Process
In order to achieve Nadcap accreditation it was also necessary to establish a thorough quality system, including well-documented process instructions and complete records for all production lots including time and temperature data, to meet the needs of the annual audit.
“The customer needed to provide 100% traceability on its output,” Skip explained. “I’ve been using CAL temperature controllers for around 25 years and I can count the number of failures on one hand so it had to be CAL. Aside from the reliability and durability of the CAL product, West Control Solutions are also very helpful with background information when I’m planning a system build.”
The CAL 9500P process controller was chosen as the front end for its flexibility and profiling power. In order to satisfy Nadcap process data requirements, all of the instruments are tied to a central PC that runs CALGrafix. The result is that every point is monitored and stored on a minute-by-minute basis.
The Results
“There have been zero flaws in the system,” Skip said. “That’s with two ovens: one with 36 controls and one with 34, both working 24 hours a day, seven days a week. A system such as this requires absolute reliability and CAL controllers have guaranteed that.”
CAL Temperature Controllers Enhance Quality of Medical Research
/in News & Events, ProductsCAL temperature controllers from West Control Solutions are helping laboratory OEMs to provide the best possible conditions for research into the treatment of diseases such as cancer.
In particular, the CAL 3300 temperature controller is providing outstanding service in controlling the performance of an incubation chamber for laboratory equipment manufacturer, Solent Scientific.
Solent Scientific and the Application
The 37 Climate Chamber from Solent Scientific is an acrylic enclosure integrated with a powerful microscope, which is used to conduct prolonged studies of living cells, usually involving time lapse image capture. These enclosures can also exclude light when working with low level light microscopy. Warm, filtered air circulates within the enclosure from a heater unit and the precise temperature within the chamber is controlled by a CAL 3300 unit.
With temperature control a critical feature of the incubation chamber, Solent Scientific turned to West Control Solutions, which has established a strong reputation across industry for providing exceptionally reliable temperature controllers that perform over long periods within extremely tight tolerances.
Temperature Control Requirements
“When we built the incubator, we were trying to create a cell culturing system that accurately replicates conditions within the human body, and that means maintaining a constant temperature. The temperature requirement for the chamber is 37° degrees, + 0.1°C. The temperature must be accurate and within that tight tolerance. The CAL 3300 is proven to be capable of delivering that, day after day, year after year.”
Selecting the Right Temperature Controller
The CAL 3300 is easy to operate, with a large 4-digit green LED display clearly showing the-current temperature, and a parameter security-locking feature that prevents the operator from inadvertently changing the settings.
The CAL 3300 brings ease-of-use to the customers of OEMs such as Solent Scientific by offering integrated auto-tune PID control (Proportional Integral Derivative). This means that users do not have to programme parameters manually, a task that requires a certain amount of technical knowledge, and reduces set up time to a few minutes.
Using PID Control
The PID facility is further enhanced by a unique dAC (Derivative Approach Control) function, which prevents control temperature overshoot during warm up. CAL has developed dAC functions outside of the proportional band during warm up by widening the proportional band. The temperature rise is slowed during this period and when the temperature falls within the original proportional band, the controller reverts back to normal operation. The result is a steady temperature rise with minimal overshoot, which can be critical when maximum temperatures must not be exceeded.
West Control Solutions has also provided Solent Scientific with a cost-efficient method of logging temperature over a period of time, a facility that was required in order to test the operation of each incubator. By using the communication software for real-time logging of CAL controllers, Solent Scientific could prove that the temperature within the incubator was kept to + or – 0.1°C over long periods of time, which is well within the tolerances required for the application. This solution avoided the considerable cost and development involved in employing SCADA (Supervisory Control And Data Acquisition) packages.
The 37° Incubation Chambers are making a major contribution to the life sciences, with sales to universities and research institutes across the globe. “Imperial College in London was our first customer in 1997,” Orry Dugdale explained. “When I visited London in 2012, the chamber was still working and I can think of no better recommendation for CAL controllers.”
Centralized Control & Monitoring eliminates operator rounds, improves furnace performance!
/in News & EventsLast month UPC put an end to clipboard rounds for a south central US energy equipment supplier. The company who depended on operators to check local furnace readings and record data manually opted instead for a major upgrade of its heat treating operations that included new multi-furnace controls and a more efficient data collection setup.
The furnace control systems equipped with Protherm 400 controllers manage twelve furnaces – continuously controlling, monitoring and archiving furnace and oil temperatures, carbon, as well as maintenance functions such as agitator and fan motor currents, and quench transfer time. To maximize data reliability and meet strict data retention requirements, data logging is performed both locally at the furnace control panel by the Protherm 400s and at a central location by the Protherm 9800, a production management software that gives users online access to real-time data from the furnace control systems. Users can also view and analyze historical data from each furnace, and monitor and address alarms.
About the upgrade: Furnace control systems incorporate UPC Protherm 400s, KD-7 paperless chart recorders, and RE-19 controllers.
Baumer Hygienic Sensors for Food Processing and Packaging
/in Industries, News & EventsTo meet the demanding requirements associated with processing and packaging food products, Baumer offers a broad portfolio of photoelectric, liquid level, inductive, and ultrasonic hygienic sensors designed to withstand chemicals and/or high pressure washdowns.
For volume measurement in meat and cheese processing, Baumer’s OADR 20 series of laser sensors provides a high degree of accuracy and resolutions from 5 µm. Encased in a stainless steel housing, these sensors feature Baumer’s unique proTect+ impermeability design to ensure compliance with protection class IP68/IP69K, even after repeated temperature cycles.
Used to detect food items or packages on conveyor belts, Baumer Series 14 hygienic photoelectric sensors are available in standard models and in a version featuring SmartReflect™, an award-winning light barrier that operates without a reflector and has a sensing distance of 800 mm.
In liquid level measurement applications, Baumer CleverLevel sensors are outstanding alternatives to vibrating fork switches. Certified according to FDA, EHEDG, and 3A guidelines, these sensors offer 1.4404 stainless steel housings, matching PM023 weld-in boss, and PEEK plastic sensor tips that protrude only 18 millimeters into the container or tube to avoid flow blockage. LBFS versions feature standard output configurations and operate from -40 to +115°C, while LFFS versions withstand operating process temperatures from -40 to +200°C and are programmable using a separately ordered Flexprogrammer.
For presence detection in food processing machinery, the Baumer IFBR and IFRR series of inductive sensors feature corrosion-resistant materials, flush connections and smooth, continuous or sealed surfaces. The sensors withstand increasingly frequent and intense cleaning and disinfection cycles, and are Ecolab-tested and EHEDG-certified.
Designed to handle challenging food packaging applications, Baumer’s UNAR 18 series of ultrasonic sensors feature stainless steel housings with a parylene coating for increased chemical resistance. The switching output version enables the sensor to detect the presence of items such as cups or bottles, while the measuring version of the UNAR 18 is well-suited for non-contact level measurement and control in filling machines.
Baumer Hygienic Sensors for Food Processing and Packaging
Stahl EX Cabinet Control system for Hazardous Locations – Worldwide installations
/in News & EventsFor more than 80 years R. STAHL has fulfilled a unique role in protecting lives and property in harsh and hazardous (classified) locations.
This Stahl EX cabinet installation build included a great many components that where build to the customers specifications and designed by Stahl for international use. Let us build one for you! Call +1 800 699 0290.