Description
– Inputs: 6 digital, 2 analog
– Outputs:Â 2 digital
– Analog input types:Â 0-5 V, 0-10 V, 0-20 mA, and 4-20 mA
– Digital input types:Â NPN, PNP, and dry contact
– Analog input impedance: mA: 15 Ω + 1.5 V | V: 1 MΩ
– Digital input characteristics:Â Logic level “”0″”: < 0.5 V | Logic level “”1″”: > 3 V
– Maximum voltage:Â 30 V
– Input impedance: 270 kΩ
– Input current:Â @ 30 VDC (typical) 0.15 mA
– Maximum frequency (square wave):Â Dry contact: 10 Hz | PNP: 3 kHz | NPN: 3 kHz
– Minimum pulse width:Â Dry contact: 50 ms | PNP: 150 us |NPN: 150 us
– Digital output characteristics: 2 NPN-type digital outputs
– Maximum current that can switch the output:Â 700 mA
– Resolution of analog channels:Â Analog inputs: 15 bits (32000 levels)
– Communication interface:Â USB | Ethernet: 10/100 Mb/s | IEEE standard 802.3u, Wi-Fi 802.11 b/g/n 2.4 GHz | RS485
– Software:Â NXperience
– Power supply:Â Voltage: 10 VDC to 36 VDC
– Wi-Fi model:Â Consumption: 70 mA @24V | Consumption: 160 mA @12V
– Ethernet model:Â Consumption: 50 mA @24V | Consumption: 120 mA @12V
– Operating conditions: Temperature: -20 to 60°C (-4 to 140°F) | Humidity: 5 to 95% RH, non-condensing
– Battery:Â CR2032 for internal clock retention
– Mounting:Â DIN rail or screw mounting
– Protection grade:Â IP20
– Housing:Â ABS+PC
Reload document 
Open in new tab 
.webp)
