Programming can be done from an onboard set of trim pots and jumpers, or more easily using our WiFi programming interface. Another common use is as a “soft-start” card – it will take a switch input and can just simply ramp up a proportional output to prevent mechanical shock. In this configuration, the analog inputs are configured for 0–5v, normally to be interfaced with a pressure transducer, inclinometer, or similar.
With the addition of J1939, the CAN valve driver is a massively flexible hydraulic valve controller or can be used to bring inputs into your CANbus network. Inputs can be fed back to J1939, and all parameters of the inputs and outputs are under your control.