Description
Configure part number: NE212.###AXA2
Interface
Outputs
Voltage supply
Technical data – electrical ratings | |
---|---|
Voltage supply | 24/48 VAC ±10 % (50/60 Hz) 85…265 VAC (50/60 Hz) 24 VDC ±10 % |
Power consumption | 15 VA 8 W |
Sensor supply | 24/48 VAC: 12-26 VDC/80 mA 85…265 VAC: 24 VDC ±20 %/200 mA 24 VDC: 24 VDC ±20 %/200 mA |
Display | LED, 7-segment display |
Number of digits | 8-digits – totalizer 6-digits – hour/main/ batch counter, tachometer |
Digit height | 7.6 mm |
Function | Preset counter Main counter with 2 presets Batch counter with 1 preset Totalizer Hour counter |
Scaling factor | 0.0001…9999.99 |
Multitplier / batch counter | 1…99 |
Count mode | Adding or subtracting Difference counting A-B Total (parallel) A B Up/Down A 90° B phase evaluation |
Counting frequency | 15 Hz, 25 Hz, 10 kHz programmable |
Preset | 2 presets |
Operating mode | Main preset Parallel alignment Trailing preset Step preset |
Data memory | >10 years in EEPROM |
Reset | Button, electric or automatic |
Outputs electronic | NPN / PNP transistor switch |
Outputs relay | Potential-free change-over contact for main counter Normally open/closed potential-free for B1 |
Output holding time | 0.01…99.99 s |
Interface | RS232 RS422 RS485 |
Standard DIN EN 61010‑1 |
Protection class II Overvoltage category II Pollution degree 2 |
Emitted interference | DIN EN 61000-6-4 |
Interference immunity | DIN EN 61000-6-2 |
Programmable parameters |
Operating modes Sensor logic Scaling factor Count mode Control inputs |
Approval | UL approval / E63076 |
Technical data – mechanical design |
|
Ambient temperature | 0… 50 °C |
Storage temperature | -20… 70 °C |
Relative humidity | 80 % non-condensing |
Connection | Plug-in screw terminal connector |
Core cross-section | 1.5 mm² |
Protection DIN EN 60529 | IP 65 (face with seal) |
Operation / keypad | 10 figure keypad with 5 function keys |
Housing type | Built-in housing |
Dimensions W x H x L | 72 x 72 x 108 mm |
Mounting depth | 108 mm |
Mounting | Clip frame for built-in housing |
Cutout dimensions | 68 x 68 mm ( 0.7) |
Weight approx. | 320 g (24 VDC/85-265 VAC) 450 g (24/48 VAC) |
Material | Housing: Makrolon 6485 (PC) Keypad: Polyester |
Baumer IVO NE212.013AXA2