NITROCARBURIZING SENSOR
NitroCarb™ is a vacuum-tight oxygen sensor for nitrocarburizing processes. A fully gas-tight design, coupled with the low-temperature operation and a special sheath, allows the NitroCarb™ to work in all FNC environments where other probes simply cannot.
The Inconel 600 Sheath is vented to prevent accumulated moisture during high dew-point heat-ups. Electrode design is tailored to nitrocarburizing temperatures up to 550°C (1022°F). The probe also provides a signal to the control instrumentation to calculate the Kc potential.
CONSTRUCTION
APPLICATIONS
| Output in a heat treating atmosphere | 1000 to 1200 mV DC |
| MIN operating temp | 800°F [425°C] |
| MAX operating temp | 1200°F [650°C]*SEE WARRANTY CARD* |
| Sensor head temp | 200 °F max. |
| Sensitivity | 0.02 mV or .0025% C |
| Accuracy | ±0.03% C |
| Stability | ±1 mV over sensor life |
| Response time | Less than 1 second |
| Impedance | Less than 6 K ohm |
| Sensor construction | Stabilized zirconia solid electrolyte; patented alloy electrode |
| Thermal shock | Caution is advised, obey installation & removal procedures |
| Sensor Life | About 2 years with normal use |
| Warranty | 1 year usage, non-prorated |
| Serviceability | No field service required, rebuildable at factory |
| Reference air requirement | 0.2 to 0.5 MAX SCFH filtered air *See Reference Air Installation* |
Anderson Controls Incorporated is a Stocking Distributor & Manufacturer’s Representative for Factory Automation, Process Control and Security products for Control & Monitoring of Temperature, Differential Pressure, Level, Position, Converters, Wireless, Satellite and Flow.
